f1ds thru f7ds surface mount glass passivated standard rectifier reverse voltage 50~1000v forward current 1a www.goodark.com 1/4 2014.03-rev.a features ? glass passivated standard rectifiers ? very low profile - typical height of 1.0 mm ? low forward voltage drop ? low forward voltage drop ? low leakage current ? moisture sensitivity: level 1, per j-std-020 ? aec-q101 qualified ? high temperature soldering guaranteed: 260/10 seconds ? halogen-free according to iec 61249-2-21 definition esga (sod \ 123fl) typical applications for use of general purpose rectification in lighting, cellular phone, portable device, power supplies and other consumer applications. maximum ratings (ta = 25 c unless otherwise noted) vrrm 50 100 200 400 600 800 1000 v vrms 35 70 140 280 420 560 700 v vdc 50 100 200 400 600 800 1000 v if(av) a ifsm a parameter symbol f1ds f2ds f3ds f4ds F5DS f6ds f7ds unit maximum repetitive peak reverse voltage maximum rms voltage maximum dc blocking voltage maximum average forward rectified current 1.0 peak forward surge current 8.3 ms single 25 ifsm a tj, tstg c unit gg half sine-wave superimposed on rated load 25 operating junction and storage temperature range - 55 to + 150 electrical characteristics (ta = 25 c unless otherwise noted) parameter test conditions symbol f1ds f2ds f3ds f4ds F5DS f6ds f7ds maximum instantaneous forward voltage 1 a v f volts ta=25 ta=125 unit parameter test conditions symbol f1ds f2ds f3ds f4ds F5DS f6ds f7ds 1.1 maximum dc reverse current at rated dc blocking voltage i r 5 a 50 i f =0.5a,i r =1.0a, i rr =0.25a typical junction capacitance 4.0 v, 1 mhz c j pf juntion to ambient r ja juntion to case r jc juntion to mount r jm note 1),the thermal resistance from junction to ambient,case or mount,mounted on p.c.b with 55mm copper pads,2 oz,fr4 pcb gg typical thermal resistance 1) 80 /w 50 10 typical reverse recovery time t rr 1.8 us 6 www.goodark.com 1/4 2014.03-rev.a
f1ds thru f7ds surface mount glass passivated standard rectifier reverse voltage 50~1000v forward current 1a www.goodark.com 2/4 2014.03-rev.a package outline dimensions ( ta = 25 unless otherwise noted ) figure ? 1.forward ? current ? derating ? curve figure ? 2.maximum non \ repetitive ? peak ? forward ? surge ? current figure 3 typical reverse characteristics figure 4 typical junction capacitance figure ? 3 . ? typical reverse characteristics figure 4 . ? typical junction capacitance figure ? 5. ? typical ? instantaneous ? forward ? characteristics ? www.goodark.com 2/4 2014.03-rev.a
f1ds thru f7ds surface mount glass passivated standard rectifier reverse voltage 50~1000v forward current 1a www.goodark.com 3/4 2014.03-rev.a package outline dimensions dim min max min max a 09 108 0 035 0 043 unit: mm unit: inch a 0 . 9 1 . 08 0 . 035 0 . 043 a1 0 0.1 0.000 0.004 b 0.85 1.05 0.033 0.041 c 0.1 0.25 0.004 0.010 d 1.7 2 0.067 0.079 e 2.9 3.1 0.114 0.122 l 0.43 0.83 0.017 0.033 soldering ?? footprint he 3.5 3.9 0.138 0.154 packin g information packing information packing quantities: 3000 pcs/reel, 40 reels/box; 8mm tape, 7" reel tape & reel specification dim min max min max a 0.9 1.08 0.035 0.043 a1 0 0.1 0.000 0.004 b 0.85 1.05 0.033 0.041 c 0.1 0.25 0.004 0.010 d 1.7 2 0.067 0.079 e 2.9 3.1 0.114 0.122 l 0.43 0.83 0.017 0.033 he 3.5 3.9 0.138 0.154 unit: mm unit: inch dim min max min max a 0.9 1.08 0.035 0.043 a1 0 0.1 0.000 0.004 b 0.85 1.05 0.033 0.041 c 0.1 0.25 0.004 0.010 d 1.7 2 0.067 0.079 e 2.9 3.1 0.114 0.122 l 0.43 0.83 0.017 0.033 he 3.5 3.9 0.138 0.154 unit: mm unit: inch dim min max min max a 0.9 1.08 0.035 0.043 a1 0 0.1 0.000 0.004 b 0.85 1.05 0.033 0.041 c 0.1 0.25 0.004 0.010 d 1.7 2 0.067 0.079 e 2.9 3.1 0.114 0.122 l 0.43 0.83 0.017 0.033 he 3.5 3.9 0.138 0.154 unit: mm unit: inch www.goodark.com 3/4 2014.03-rev.a
f1ds thru f7ds surface mount glass passivated standard rectifier reverse voltage 50~1000v forward current 1a www.goodark.com 4/4 2014.03-rev.a disclaimers these materials are intended as a reference to assist our customers in the selection of the suzhou good-ark product best suited to the customer ? s application; they do not convey any license under any intellectual property rights or any other rights belonging to suzhou any license under any intellectual property rights , or any other rights , belonging to suzhou good-ark electronics co., ltd.or a third party. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, or infringement of any third-party ? s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. all information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by suzhou good-ark electronics co., ltd. without notice due to product improvements or other reasons. it is therefore recommended that customers contact suzhou good-ark electronics co., ltd. or an authorized suzhou good ark electronics co ltd for the latest product information before purchasing a g oo d - a r k el ec t ron i cs c o., ltd . f o r th e l a t es t pro d uc t i n f orma ti on b e f ore purc h as i ng a product listed herein. the information described here may contain technical inaccuracies or typographical errors. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. please also pay attention to information published by suzhou good-ark electronics co., ltd. by various means, including our website home page. ( htt p ://www. g oodark.com ) (http://www.goodark.com) when using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. suzhou good-ark electronics co., ltd. assumes no responsibility for any damage, liability or other loss resulting from the information ti dh i con t a i ne d h ere i n. the prior written approval of suzhou good-ark electronics co., ltd. is necessary to reprint or reproduce in whole or in part these materials. please contact suzhou good-ark electronics co., ltd. or an authorized distributor for further details on these materials or the p roducts contained herein. further details on these materials or the products contained herein . www.goodark.com 4/4 2014.03-rev.a
|
